Improved Scarifier Tools

CB7WFRKCSB is engineered for longer life
and easy installation!

• Superior wear and rotation!
• Washer keeps out debris and improves rotation for extended bit life
and less block wear!
• New full-sleeve retainer design protects the inside of the bore and
prevents uneven wear!
• Washer precompresses the retainer to make the tool easier to install!
• Retainer grips tighter to prevent bit loss!

Cutting Tools and Accessories

C855HD
1011208

  • Larger carbide tip than similar competitive tools
  • Improved with 30% stronger braze
  • Blunt-nose tip style
  • Fits competitive blade systems

C855HDX
1011206

  • Larger carbide tip than similar competitive tools
  • Improved with 30% stronger braze
  • Same body style as C855HD, but with added steel
    for increased strength and wear life
  • Fits Kennametal and competitive blade system

C855KCSB
1855704 

  • Designed for maximum wear life and durability
    (like C858KCSB)
  • Longer gage length for reduced wear on blades
    and blocks
  • Ideal for general-duty and heavy-impact
    applications

C855KC5
1855705

  • New bell-shaped tip maintains sharp profile and strength
    for better penetration and breakage resistance
  • Heavy-duty steel body for reduced wear in highly abrasive
    conditions
  • Mid-sized carbide tip provides economical, long tool life in
    tougher applications

C855A
1012994

  • 4-tiered design increases penetration into
    hard-to-cut materials
  • Larger carbide tip design than other 855 series tools
    for longer tool life
  • Fits Kennametal and competitive blade styles

C855DS
1011196

  • Extra-large, sharp carbide tip
  • Long tool life and high penetration in asphalt planing
    applications
  • Fits Kennametal and competitive blade systems

C858KCSB
1010880

  • Longest wearing carbide tip available
  • For use on a all types of road surfaces
  • Specially designed carbide tip for extra-long tool life
    and added steel-wash protection
  • 1.45″-diameter cutting tool shoulder protects block face
    from excessive wear

C87KCSBSR
1010937

  • Same design as C858KCSB, with added”barbed” short retainer
    for improved cutting tool retention

C387DS
1010906

  • Sharper carbide tip for increased penetration
  • Large carbide tip for long tool life in average cutting conditions
  • Specially designed flange protects block from excessive wear
  • Puller groove for easier tool extraction from front side of blade

C87DSSR
1010935

  • Same tip as C387DS, but shank features “barbed”
    short retainer for improved retention in block
  • Larger steel body provides longer wear life

KCWB0291
1012580

  • Flat, non-rotating design
  • Wear face made from KenCastTM, a composite material that combines
    wear resistance of Kennametal’s exclusive carbide with dutility
    of air-hardening steel
  • 1.88″ wide for “near” continuous cutting edge that’s suitable
    for spreading/finishing

C387BF
1010817

Sharp pointed tip for easy penetration of hard surfaces
Excellent in soft to medium-hard abrasive conditions
Specially designed flange protects block face from excessive wear
Ideal for removing high spots and washboard effect on
asphalt-paved roads

C855LR
1011001

  • Sharp carbide tip
  • Fits Kennametal and competitive blade systems

AR15087LR
1012240

  • For fine grading or scarifying in soft to medium-hard conditions,
    or for scraping without penetrating road surface
  • 1 1/2″ cutting face width for better block protection
  • Swept-back carbide edge design provides exceptional tool life
  • Non-rotating tool (not self-sharpening)
  • wider tool face reduces gap between cutting edges for smooth,
    grooming applications

C87BF
1010815

  • Superior in hard cutting applications
  • Specially designed flange protects block from excessive wear
  • Unique carbide tip provides fast penetration

C100 24.43SB
1847237

  • Specially designed and manufactured for use in competitive
    “mining duty” systems
    (This tool does not fit Kennametal blade systems)
  • Contains more carbide than similar competitive designs

C87GB
1012234

  • Replacement toolholder for Kennametal blade systems
  • Easily welded with a 7018 or 8018 low-hydrogen rod, with no
    preheating required

KCWB-0448
1834342

  • Specially designed to act as a “skid shoe” for ice-removal
    applications
  • Features durable, long-lasting KenCastTM material on wear surface
  • Place cutting tools in varied positions along moldboard length
    to prevent penetration of road surface when clearing ice
    on paved surfaces
  • Non-rotating tool

Extraction Tools
Make cutting tool changes easier and safer!

KHP2
Hammer Punch
1012247

  • For removing cutting tools
    from blocks
  • Hardened tip for longer life;
    used with a hammer
  • Plastic hand protector for added safety

KAHP1
Air Hammer Punch
1012245

  • For removing cutting tools
    from blocks
  • Hardened tip for durability
  • Fits all light-duty air-hammer
    guns that have a 3/8″ chuck

KAHP 1D
Air Hammer Punch
1012246

  • For removing cutting tools from blocks
  • Hardened tip for durability
  • Fits all light-duty air-hammer guns that have a 1/2″ chuck

Scarifier Blade Attack Angle
Carbide cutter teeth are pre-set
for best rotation & surface fracture